Beacons
The 7945 Series beacon combines all the major benefits of the latest LED technology with a traditional, strobe style housing at a price point comparable to a strobe. Available in either 5” or 7” height profiles the 7945 is suitable for a wide range of applications where an SAE Class II light is required. The 7945 features 12-48VDC operation and 11 flash patterns to produce an attention getting warning signal. 2-year warranty.
VOLTAGE | 12-48 V |
FLASH PATTERN | 11 |
APPROVAL | SAE J845 CLASS II, CE, R10, ROHS |
HEIGHT | 4.9 |
WIDTH | 6.5 |
WARRANTY | 2 YEAR |
• UV coated dome
• Powder-coated cast aluminum base
• 100% solid-state
• Conformal coated electronics
• Full reverse polarity protection
• Hard-coated domes minimize environmental damage from sand, sun, salt, and road chemicals
• Permanent Mount
• Rated for thousands of hours of use
• 12 VDC
• Five year warranty
Cast Aluminum Base
L31
• 4 Amp (peak), 1.6 Amp (average)
• SAE Class 1 Certified in Amber
• California Title XIII, Table 1B Certified in Amber
• 4"? (102mm) H x 7-3/16"? (182mm) Dia.
• UV coated dome
• Powder-coated cast aluminum base
• 100% solid-state
• Conformal coated electronics
• Full reverse polarity protection
• Hard-coated domes minimize environmental damage from sand, sun, salt, and road chemicals
• Rated for thousands of hours of use
• 12 VDC
• Five year warranty
L31
• 4 Amp (peak), 1.6 Amp (average)
• SAE Class 1 Certified in Amber
•
• 4"? (102mm) H x 7-3/16"? (182mm) Dia.
The 7160 Series Reflex® LED beacon provides the ultimate level of power, versatility and style available in an LED beacon. The latest high intensity LEDs combined with reflector technology produce a powerful, SAE Class I/Cal Title 13, warning signal in a light that also offers premium features including 15 flash patterns, hi/lo intensity control and synchronization capability. Low amp draw, zero maintenance and an extended life backed by a 5 year warranty make this light an obvious choice to replace strobe or rotating lights.
VOLTAGE | 12-24 V |
FLASH PATTERN | 23 |
APPROVAL | SAE J845 CLASS I, CAL. TITLE 13, CE, R10, IP66, ROHS |
HEIGHT | 3.9 |
WIDTH | 6.5 |
WARRANTY | 5 YEAR |
7960 Series Pulse® LED beacon offer SAE Class I light output and double or quad flash operation combined with a long maintenance free service life and low amp draw, making this beacon a cost effective choice for many applications. The die-cast aluminum base is coated against corrosion, electronics are encapsulated in epoxy for dust, moisture and vibration protection while the thread-on polycarbonate lens allows easy flash mode selection without tools (via circuit board mounted microswitch). Easily replaces old rotating or strobe beacons with the latest technology so no ongoing maintenance is required.
VOLTAGE | 12-24 V |
FLASH PATTERN | 11 |
APPROVAL | SAE J845 CLASS I, CAL. TITLE 13, CE, R10, IP56, ROHS |
HEIGHT | 5.6 |
WIDTH | 6.5 |
WARRANTY | 5 YEAR |